valve body

Beneath the hand wheel are two nuts attached the valve body.

在手轮下面是两个附在阀体上的螺母.

Turn handle to be perfectly perpendicular to valve body.

将手柄旋转到与阀体完全垂直的位置.

Reassemble the check module in the reverse order. Install the check modules into the valve body hand-tight. Replace the cover.

按照相反顺序重新组装止回阀模块。将止回阀模块安装进阀体内，用手紧固。重新安装阀盖。

The valve body is accurate for the high quality brass Cast machining and take shape.

阀体为优质黄铜精密铸造机械加工形成.

The utility model relates to a single-action two-way equalizing valve, comprising a valve body, a valve plug, a valve rod, a pressing cover, a compensating cushion ring, etc.

本实用新型是一种单动双通平衡阀，由阀体、阀塞、阀杆、压盖、补偿垫圈等组成。

A new-type electromotive force pot pressure limiting valve, consists of valve bonnet, valve body, thimble, spring, valve eye ring, valve seat, exhaust pipe sealing ring, nut, and exhaust pipe.

一种新型电压力锅限压阀，包括阀盖、阀体、顶针、弹簧、阀提手、阀座、排气管密封圈、螺母、排气管。

Vent the piping and test valve body cavity to remove air or steam.

排放管道和试验阀门体腔内的空气或蒸汽。

Loosen bolts on groove coupler and remove groove coupler and cover plate from valve body.

松懈沟槽状联结器上的螺栓,从阀体上拆卸沟槽状联结器和阀盖板.

Diaphragm valve body flow smoothly, cutting components for the elastic diaphragm, valve cover stuffing.

隔膜阀体流通平滑、节流元件为弹性隔膜阀，阀盖上无填料函。

Typically, a control valve body has a close resonancefrequencyto the pipe system.

通常, 控制阀阀体的共振频率和管道系统比较接近.

Electric heat-tape wrap closely together around valve body.

电热交叉缠绕水布紧密地环绕阀体.

The wellhead throttle valve is made up of nozzle, plunger-shaped spool, throttle value, valve body and valve rod, etc.

该井口节流阀由喷嘴、柱塞形阀芯、节流轴、阀体、阀杆等组成。

Leave the cam assembly clapper parallel to valve body.

使得凸轮总成阀瓣平行于阀体.

Structure Optimization and Reliability Analysis for Large-calibred Gate Valve Body

大口径闸阀阀体结构优化与可靠性分析

Valve body and internal parts: anodized aluminum alloy, copper.

阀体和内部零件: 阳极电镀铝合金 、 铜.加固端盖:塑料.

Electric tape wrap together around valve body.

环绕整个阀体包裹电热带.

Strength analysis and structural optimization for large-calibred gate valve body by using AWE It is applicable to big ranges of pressure, temperature and caliber, especially to the pipeline of moderate or big caliber.

基于AWE的大口径闸阀阀体强度分析与结构优化闸阀适用的压力、度及口径范围很大，尤其适用于中、口径的管道。

Insert valve body through mounting hole and seat lugs.

将阀体插入安装孔和密封连接盘.

Screw the cover onto the valve body.

将阀盖旋在阀体上.

Remove the body bolts from the valve body.

从阀体上拆卸阀体螺栓.

Screw cover onto valve body.

用螺丝将阀盖固定在阀体上.

The advantage of CAD/ CAE powerful functions of UG software is made to realize gate valve modeling, assembling, and key parts motion simulation and finite element analysis of valve body, with the result that the dimension and structure of valve body are optimized.

利用UG软件强大的CAD/CAE功能进行闸阀的建模、装配、关键部分的运动仿真及阀体的有限元分析，对阀体尺寸和结构进行优化。

After leaving the packing ring, the arrow-shaped valve body falls to open the lock of the tension releasing control pin.

箭形阀体离开密封环落坐开启泄压控制销锁定；

IMPORTANT ! Flow must always be in direction of arrow on valve body.

重要提示! 水流流向必须与阀体上的箭头方向一致.

The dry quick isolating valve can bring about quick joint and cut off of the valve body with no leakage of liquid.

干式快速切断阀能够实现阀体的快速对接和断开，不存在流体泄漏的现象。

Seat shall be a non-liner type interlocked to valve body.

阀座应该是无衬垫结构并连锁到阀体上.

J41N Type PN40 steel globe valves: manual, flanged, straight-through, the valve seat sealing surface material as nylon plastic, nominal pressure PN40, carbon steel valve body material cut-off valve.

J41N型PN40钢制截止阀：手动、法兰连接、直通式、阀座密封面材料为尼龙塑料、公称压力PN40、阀体材料为碳素钢的截止阀。

The upper part of the floating bucket valve body is provided with an oil-water interface setting opening on which a sealing cover is arranged.

浮桶阀体上部设有油水界面设定口，油水界面设定口上装有密封盖。

Fork Lift , Valve, Body Coupling, Bracket.

供应阀门,叉车起重机, 耦合器, 插座等.

Molded-in liner fully supported by valve body at flange seals.

模铸进的衬垫被整体固定在阀体的法兰密封处.